Call
whatsapp
9447387064 | 9847003556
0471-2335855 | 8089080088 | 0471-2334855
9447387064 | 9847003556
0471-2335855 | 8089080088 | 0471-2334855
Cisco Training in Trivandrum, Trinity Technologies

No.1 Training Institute in Kerala

CCNA QUESTIONS : PART 6

A router has learned three possible routes that could be used to reach a destination network. One
route is from EIGRP and has a composite metric of 20514560. Another route is from OSPF with a
metric of 782. The last is from RIPv2 and has a metric of 4. Which route or routes will the router
install in the routing table?

the OSPF route

the EIGRP route

 the RIPv2 route

 all three routes

the OSPF and RIPv2 routes

SHOW ANSWER

Which command can you enter to verify that a BGP connection to a remote device is established?

 

 show ip bgp summary

show ip community-list

show ip bgp paths

show ip route

SHOW ANSWER

Which command can you enter to set the default route for all traffic to an interface?

router(config)#ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/1

 router(config-router)#default-information originate always

 router(config)#ip route 0.0.0.0 255.255.255.255 GigabitEthernet0/1

route(config-router)#default-information originate

SHOW ANSWER

Which three statements about link-state routing are true? (Choose three.)

 

OSPF is a link-state protocol.

 Updates are sent to a broadcast address.

 It uses split horizon.

Routes are updated when a change in topology occurs.

RIP is a link-state protocol.

Updates are sent to a multicast address by default.

SHOW ANSWER

A network administrator is troubleshooting an EIGRP problem on a router and needs to confirm
the IP addresses of the devices with which the router has established adjacency. The retransmit
interval and the queue counts for the adjacent routers also need to be checked. What command
will display the required information?

 

Router# show ip eigrpneighbors

Router# show ip eigrp interfaces

 Router# show ip eigrp adjacency

 Router# show ip eigrp topology

SHOW ANSWER

What is the correct routing match to reach 172.16.1.5/32?

 

172.16.1.0/26

 172.16.1.0/25

172.16.1.0/24

 the default route

SHOW ANSWER

Which three characteristics are representative of a link-state routing protocol? (Choose three.)

 

provides common view of entire topology

 exchanges routing tables with neighbors

 calculates shortest path

 utilizes event-triggered updates

 utilizes frequent periodic updates

SHOW ANSWER

Which three statements about static routing are true? (Choose three.)

It uses consistent route determination.

 It is best used for small-scale deployments.

 Routing is disrupted when links fail.

It requires more resources than other routing methods.

 It is best used for large-scale deployments.

 Routers can use update messages to reroute when links fail.

SHOW ANSWER

What does split horizon prevent?

 

routing loops, link state

routing loops, distance vector

 switching loops, STP

 switching loops, VTP

SHOW ANSWER

What routing protocol use first-hand information from peers?

 

link-state

 distance-vector

 path-vector

 other

SHOW ANSWER

Which feature is config by setting a variance that is at least 2 times the metric?

 

unequal cost load balancing

path selection

 equal cost load balancing

path count

SHOW ANSWER

An interface which we have to determine from the routing the route learned by which routing
protocol?

 EIGRP

OSPF

 RIP

BGP

SHOW ANSWER
BACK | NEXT
TRINITY SOFTWARE SOLUTIONS
IInd floor, Radheyam Towers, Gandhari Amman Kovil Road, Pulimood, Trivandrum - 1
0471-2334855 | 2335855 | 9447387064 | 9847003556 info@trinitytechnology.in