Which of the following are ways to provide login access to a router?
Aux Port
HTTP
Console
Telnet
SHOW ANSWERWhich statement is true regarding the user exec and privileged exec mode?
They both require the enable password
User exec is a subset of the privileged exec
The '?' only works in Privileged exec
They are identical
SHOW ANSWERThis modem standard has a speed of 28.8k and has error-correction features.
V.42
V.32bis
V.90
V.34
SHOW ANSWERRIP decides the best path (routing metric) base on _______.
bandwidth
Delay
Hop Count
Link Speed
SHOW ANSWERWhat would be the proper command to set a DCE clock rate of 56k for a serial interface?
Router (config) # clockrate 56000
Router# clockrate 56000.
Router (config-if) #clock rate 56000
Router (config-if) # clockrate 56k
SHOW ANSWERRIP defines two types of messages:
Hello message
Request Message
LSA
Response Message
SHOW ANSWERYou can enable RIP on Cisco router by following command:
R(config)#router rip
R(config-if)#router rip
R#router rip
R4(config)#router rip version 2
SHOW ANSWERThere are different timers that are used in RIP, choose the three correct from following:
Hello Timer
Flush Timer
Invalid Timer
Update Timer
SHOW ANSWERYou are designing a network which needs to support 200 users. You don't plan to extend the segment beyond the current number of users. Which subnet mask would best meet your needs? Select the best answer.
255.255.0.0
255.255.255.0
255.0.0.0
255.224.0.0
SHOW ANSWERRIP version 2 has the following new features:
VLSM/subnetting
Authenications
area base division
stub area
SHOW ANSWERRIPv2 send the entire routing table to all connected routers at the multicast address _______.
224.0.0.10
225.0.0.9
225.255.255.255
224.0.0.9
SHOW ANSWERR.webp (RIP next generation) is an advance version of RIPv2 and have support for ______
IPv4 only
Instant massaging
IPv6
IPv4 & IPv6
SHOW ANSWERThere is a distance vector protocol such as RIP. we’ve entered the RIP process by executing:router rip.
On one of our router’s interfaces, we have the following IP address: 192.168.1.65 255.255.255.192.
Which will be the command to include this interface in the RIP routing process?
network 168.192.1.0.
network 192.168.1.2.
network 192.168.1.0.
All above are correct
SHOW ANSWER