 |
 |
|
|
These are the features present in IPV4 but not in IPV6
Fragmentation
Header checksum
Options
All of the above
SHOW ANSWERIn subcategories of reserved address in IPV6 address that is used by a host to test itself without going into network is called
Unspecified address
Loopback address
Compatible address
Mapped address
SHOW ANSWERA few leftmost bits in each address of IPV6 address defined its categories is called
Prefix type
Postfix type
Reserved type
Local type
SHOW ANSWERIn IPV6 address, addresses start with eight 0s are called
Unicast address
Multicast address
Any cast address
Reserved address
SHOW ANSWERWhich statement are true
Leading zeros are required
Two colons are used to represents successive hexadecimal field of zeros
Two colons are used to separate fields
A single interface cannot have multiple IPV6 address of different types
SHOW ANSWERWhich of the following is not applicable for IP?
Error reporting
Handle addressing conventions
Datagram format
Packet handling
SHOW ANSWERTo enable OSPFv3, which of the following would you use?
Router(config-if)# IPv6 OSPF 10 area 0.0.0.0
Router(config-if)#IPv6 router rip 1
Router(config)#IPv6 router EIGRP 10
Router(config-rtr)#no shutdown
Router(config-if)#IPv6 EIGRP 10
SHOW ANSWERWhat multicast address does RIPng use?
FF02::A
FF02::9
FF02::5
FF02::6
SHOW ANSWERWhich of the following is true when describing a global unicast address?
Packets addresses to a unicast address are delivered to a single interface
These are your typical publicly routable addresses, just like a regular publicly routable address in IPV4
These are like private addresses in IPV4 in that they are not meant to be routed
These addresses are meant for non routing purposes, but they are almost globally unique so it is unlikely they will have an address overlap
SHOW ANSWERPort address translation is also called what?
NAT fast
NAT static
NAT overload
Overloading static
SHOW ANSWERWhich of the following needs to be added to the configuration to enable PAT?
IP nat pool Corp 198.18.41.129 198.18.41.134 net mask 255.255.255.248
Access-list 1 permit 192.168.76.64 0.0.0.31
IP nat pool inside overload
IP nat inside source list pool Corp overload
IP nat pool outside overload
IP nat pool Corp 198.41.129.0 net 255.255.255.0 overload
SHOW ANSWERWhich command would you place on the interface of a private network?
IP nat inside
IP nat outside
IP outside global
IP inside local
SHOW ANSWERWhich of the following is considered to be inside host’s address after translation?
Inside local
Outside local
Inside global
Outside global
SHOW ANSWER
